How To Install The Home Station - LG HOM-BOT 2.0 Owner's Manual

HOW TO INSTALL THE HOME STATION

How to Install the Home Station
1. Position the home station against a wall, to prevent sliding during
docking, on hard level flooring.
Remove objects within 3 ft. to the right and left side and within
6 ft. to the front.
2. Plug the power cord into an outlet.
Wrap the power cord around the fixed hook on the back side of
the home station or along the wall surface so that the travel path
of the HOM-BOT 2.0 will not be obstructed.
3. Fix the home station against the wall so that it does not move.
4. When the remote controller is not used, store it on the remote
controller holder on the home station.
Tip
• Always keep the home station plugged in. If the home station is not plugged in, the
HOM-BOT 2.0 will not return to the station to charge automatically.
Warning Do not operate the HOM-BOT 2.0 if it has a damaged cord or plug, if it is not working
properly, or if it has been damaged or dropped. To avoid hazard, the cord must be
replaced by LG Electronics, Inc. or a qualified service person.
Fixing hook of power cord
13