Location Search Function - LG HOM-BOT 2.0 Owner's Manual

LOCATION SEARCH FUNCTION

HOM-BOT 2.0 remembers its location while cleaning.
If the user moves the HOM-BOT 2.0 while it is operating, it will search its location with
the location search function to continue from previous location.
When the user removes any abnormal condition of
HOM-BOT 2.0 or moves the location arbitrarily, the
location search function will activate.
1. Locate HOM-BOT 2.0 near the location where
HOM-BOT 2.0 was moved.
※ Location search is more effective when
HOM-BOT 2.0 is closer to the location where it
was moved.
※ If it goes out of diameter of 1m from the
occurrence position, it becomes difficult to
search the position.
2. Press the START/STOP button on HOM-BOT 2.0 or START button on the remote controller.
HOM-BOT 2.0 will start the location search function along with an audio guide.
※ When the location search is successfully completed, HOM-BOT 2.0 will continue to the cleaning from
where it was moved. If position search fails, it will start again from the beginning.
Location of incident
Tip
• When the power is turned off after the location search function is set, the location search
function will be canceled.
• After position search function is set, if timer is set or it is recharged, then the setting will be
cancelled.
22
Change location
Checking current location.
When the location search
function is activated, the
cleaning mode of the status
indicator will flash
1m
1m
Location of incident