Cleaning Modes - LG HOM-BOT 2.0 Owner's Manual

CLEANING MODES

Zigzag Cleaning
With zigzag cleaning, total inside of the house will be
cleaned with the repetition of zigzag traveling.
If rapid cleaning is desired, use zigzag cleaning.
When pressing 'ZIGZAG' button of remote controller,
zigzag cleaning will be started while zigzag cleaning icon is
indicated at the state indication lamp.
Spatial Expansion Cleaning
With spatial expansion cleaning, the cleaning will be
performed by dividing the inside of the house into partial
square spaces.
If elaborate cleaning is desired, use spatial expansion
cleaning.
When pressing 'Cell by Cell' button of remote controller,
spatial expansion cleaning will be started while spatial
expansion cleaning icon is indicated at the state indication
lamp.
The 1st stage:
The maximum outline of 3m x 3m of cleaning area
will be cleaned. (The size of outline will be changed in
accordance with the shape of the house inside.)
The 2nd stage:
Inside of the outline will be cleaned with zigzag traveling.
When the 1st, 2nd stages are completed, the inside of
the house will be cleaned through the repetition of above
cleaning method as the device is being moved to the next
cleaning area.
Tip
• Once set up, the cleaning mode will be maintained even after the power supply is turned off.
• During operation, if a mode change is required, press the STOP button and then select the
mode.
• The corner cleaning may not work properly in a threshold of 70 mm or less.
• When cleaning a tatami floor, please use a suction nozzle specially designed for cleaning
tatami
18