Cleaning The Side Brush - LG HOM-BOT 2.0 Owner's Manual

Foreign objects/materials such as hair can easily adhere to the side
brush. Remove such materials at least once a week.
If excessive amounts of foreign materials are stuck to the brush,
there is the risk of damage to the brushes.
If the floor is rough or walls are frequently cleaned, the side brush may bend or become damaged. In this
case, use the following method to straighten the side brush.
1. The following procedure is helpful in restoring
deformed brushes.
2. Turn off the power supply by pressing the
START/STOP button on the HOM-BOT 2.0 for
two seconds.
3. Place the HOM-BOT 2.0 at the end of a table to
make cleaning the side brush easier. Make sure
that the HOM-BOT 2.0 is not in danger of falling.
4. Soak the side brush in warm water.
5. Press down on the side brush for about ten
seconds so that it is completely submerged in
the water.
6. Slowly wipe the side brush by sliding it through
your hand.
7. Rotate the side brush and repeat steps 4-6 for
each section of the brush.
8. Use the side brush only after it has completely
dried.
How to change the side brush
1. Remove the screw and separate the side brush.
2. Exchange and re-assemble new side brushes.

CLEANING THE SIDE BRUSH

27