Mop Cleaning (Option) - LG HOM-BOT 2.0 Owner's Manual

By attaching the ultra microfiber mop, you can
effectively use the HOM-BOT 2.0 to remove dust.
When the mop plate is attached, the HOM-BOT 2.0
will not climb on to carpets or over thresholds, in
order to prevent transferring dirt from the mop.
For mop cleaning, mount the mop and mop plate to the HOM-BOT 2.0 according to the following instructions:
1. Attach the ultra microfiber mop to the Velcro
of the mop plate as shown in the figure.
※ To prevent the HOM-BOT 2.0 from
malfunctioning, attach the mop so that the
mop attaching guide will not be covered by
the mop.
Ultra microfiber mop
Mop fixing section
2. Accurately match up and insert the mop plate
fixing hook on the lower section of the
HOM-BOT 2.0 into the fixing groove of the
mop plate.
3. When you accurately match up and press the
mop plate to the rear side of the HOM-BOT
2.0, it will mount with a clicking sound.
※ Be careful to properly mount the mop plate,
or it can separate during cleaning.
Tip
• To avoid odors, wash any foreign material or dust off the mop after cleaning is complete.
• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is mixed with
liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not clean the
carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture, it can interfere with the navigation.

MOP CLEANING (OPTION)

Ultra microfiber mop
Bottom camera sensor
With mop attached
Mop plate
Ultra microfiber mop
Fixing hook
"Click!"
Ultra microfiber mop
Mop plate
Fixing groove
21