How To Charge The Battery - LG HOM-BOT 2.0 Owner's Manual

HOW TO CHARGE THE BATTERY

Automatic charging
The HOM-BOT 2.0 returns to the home station at the end of a
cleaning cycle or when its battery is running low.
※ In the event that the unit returns to the Home Station due to a low
battery, cleaning will be started, after the charging, from the nearest
place of the area which has not been cleaned before. (Page 17)
※ If HOM-BOT 2.0 is unable to dock to the home station on its
first attempt, it will try again until it docks successfully.
※ When HOM-BOT 2.0 completed all areas that it can clean, it will
return to the home station even when the battery level is not low.
※ HOM-BOT 2.0 will automatically return to the home station to recharge when it's left uncharged or without
cleaning order for more than 10 minutes.
※ Do not operate HOM-BOT 2.0 on tables or desks. It may result in an injury or damage to the product
when it starts to search for home station after 10 minutes.
Be sure to turn the power off when placing HOM-BOT 2.0 on high furniture.
Manual charging
If using the HOM-BOT 2.0 for the first time or when charging the battery during cleaning, you can manually
charge the battery.
※ If the HOM-BOT 2.0 does not start cleaning from the home station or if the HOM-BOT 2.0 is manually
charged by pressing the charge button, it may take slightly longer to find the home station.
※ If the HOM-BOT 2.0 stays within 10 cm (3.9 in) of the front of the charging terminal while the power
supply is turned on, it will automatically be returned to the home station and charging will begin.
Tip
Take the following precautions when using the home station:
• If foreign material is caught in the charging terminal, charging may not proceed smoothly.
Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.
• To prevent electric shock, do not touch the charging terminal with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the home station or power plug near to a heating appliance.
16
Method 1. Attach the HOM-BOT 2.0 to the home
station by aligning to the front side of the
home station. A melody sound will be
generated along with an audio message to
start charging.
※ If an audio message saying "Turn on the
main power switch on the bottom of the
unit" is generated repeatedly when the
HOM-BOT 2.0 is attached to the home
station, please check the power switch
and turn it on.
Method 2. When the HOMING button of the remote
control or the HOM-BOT 2.0 is pressed,
charging will start by automatically
generating a searching sound and returning
the HOM-BOT 2.0 to the home station.