Table of Contents
Advertisement
HOW TO INSTALL THE HOME STATION
How to Install the Home Station
1. Position the home station against a wall on hard level flooring to
prevent sliding during docking.
Remove objects within 1.5 m to the right and left side and within
2 m to the front.
2. Plug the power cord into an outlet.
Wrap the power cord around the fixed hook on the back side of
the home station or along the wall surface so that the travel path
of the Robot Cleaner will not be obstructed.
3. Fix the home station against the wall so that it does not move.
Please turn on the power switch.
4. When the remote controller is not used, store it on the remote
controller holder on the home station.
Tip
• Always keep the home station plugged in. If the home station is not plugged in, the
Robot Cleaner will not return to the station to charge automatically.
< Warning >
Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug, if
it is not working properly, or if it has been damaged or dropped. To avoid hazard, the
cord must be replaced by LG Electronics, Inc. or a qualified service person.
14
1.5
2
1.5
5.1 ﻣﺘﺮ
2 ﻣﺘﺮ
5.1 ﻣﺘﺮ
Fixing hook of power cord
Advertisement
Table of Contents
