Configuring User Interface; Available Settings For User Interface; Configuring Measurement Settings - Produal Proxima WBU Commissioning And Maintenance Instructions

12. Select the disconnecting method.
• Select Disconnect to disconnect the device without deactivating the device Bluetooth.
• Select End commissioning to disconnect the device and deactivate the device Bluetooth.
Note: The wireless network communication (MIRA communication) starts only if
the Bluetooth is deactivated. However, the device also deactivates the Bluetooth if
connection to Produal MyTool

6.1 Configuring user interface

1. Press the UI Settings button in the Configurations view.
2. Make the settings.
See the chapter
3. Press the Confirm changes button to save the changes.
4. Press Install to device button to write the changes to the device.

6.1.1 Available settings for user interface

Parameter name
Display brightness
Display mode
Display static value
Scrolling values to
show
Autoscroll time
Button function

6.2 Configuring measurement settings

1. Press the Measurement Settings button in the Configurations view.
Produal Oy | Keltakalliontie 18, FI 48770 Kotka, Finland | tel. +358 10 219 9100 | fax. +358 5 230 9210 | info@produal.com
Published: 18.07.2019
Available settings for user interface
Values Default
1...10 5
Upper value Upper value
scrolling, lower scrolling, lower
value static / Upper value static
value static, lower
value scrolling
Temperature / Temperature
Relative humidity /
Measurement
1...4 / External
measurement
1...4 / I2C
measurement
1..3 / VOB value
1..3
Temperature / Humidity
Relative humidity /
Measurement
1...4 / External
measurement
1...4 / I2C
measurement
1..3 / VOB value
1..3
1...30 s 10 s
Manual scroll / Manual scroll
Handle button
events on
Gateway / Extra
time function
Information is subject to change without prior notice.
®
is lost for 30 minutes.
on page 55 for more details.
Description
Display brightness level.
Display scrolling settings.
Static value selection.
Scrolling values selection.
Scrolling value change interval. Time to show each
value on display. Affects also to display off delay.
Display off delay = (number of items in scrolling
value selection) * (display scrolling delay).
Button function. The first press activates the
display if the display is not on.
55 (63)
EN - 5401comm