2.8 Indicator lights
2.8.1 WBU indicator lights
The indicator lights indicate the device status.
Power
CPU
2x 5 s
3x 5 s
4x 5 s
Room unit
RS-485
PUMP
Wireless
2.8.2 WTR indicator lights
The indicator light indicates the device status. The indicator light is active during the first hour after
connecting the power supply, or after the transmitter has lost connection to the network, or after the
device has booted.
Produal Oy | Keltakalliontie 18, FI 48770 Kotka, Finland | tel. +358 10 219 9100 | fax. +358 5 230 9210 | info@produal.com
Published: 18.07.2019
The light is on when the supply voltage is connected.
Produal MyTool
®
is connected to the device.
All transmitters are online and working.
2x 5 s
At least one transmitter is offline.
3x 5 s
The network is not configured.
4x 5 s
The light is not in use.
The light indicates the communication in the RS‑485 port.
The light indicates that PUMP expansions are connected to the control unit.
Indicates the push of the connection button.
Information is subject to change without prior notice.
10 (63)
EN - 5401comm