Available Settings For Average Groups; Configuring Alarms; Available Settings For Alarms - Produal Proxima WBU Commissioning And Maintenance Instructions

3. Select the average group type.
The available types are:
Disabled
Temperature
Relative Humidity
CO2
4. Press the Edit parameters button.
5. Make the settings.
See the chapter
6. Press the Confirm changes button to save the changes.
7. Press the Confirm changes button again to save the changes.
8. Press Install to device button to write the changes to the device.

4.1.1 Available settings for average groups

Parameter name
Average calculation
source selection
Selected transmitters
Temperature average
high cutoff
Temperature average
low cutoff

4.2 Configuring alarms

1. Press the Alarm Settings button in the Configurations view.
2. Make the settings.
See the chapter
3. Press the Confirm changes button to save the changes.
4. Press Install to device button to write the changes to the device.

4.2.1 Available settings for alarms

Parameter name
Offline alarm
Produal Oy | Keltakalliontie 18, FI 48770 Kotka, Finland | tel. +358 10 219 9100 | fax. +358 5 230 9210 | info@produal.com
Published: 18.07.2019
Average group disabled.
Average group for temperature measurements.
Average group for relative humidity measurements.
Average group for CO
Available settings for average groups
Values Default
Internal / External Internal
1...4
2 3 4 5
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70
71 72 73 74 75 76 77 78 79 80
81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100
-100...100 °C 0,0 °C
-100...100 °C 0,0 °C
Available settings for alarms
Values Default
Off / 180...65535 s 7200 s
Information is subject to change without prior notice.
measurements.
2
on page 22 for more details.
Description
Source for the measurement. Internal = internal
measurement. External = external measurement.
External measurements are available for the
devices that have inputs (e.g. WTR-IM).
List of transmitters that are used in the average
group. The selected transmitters are marked with
green background and online transmitters are
marked with white background. Offline transmitters
can also be selected to the average group.
Set the highest value that is used in the average
calculation. Values over the set value are not used
in the calculation. The parameter is available only
for temperature average groups.
Set the lowest value that is used in the average
calculation. Values below the set value are not
used in the calculation. The parameter is available
only for temperature average groups.
on page 22 for more details.
Description
Alarm for offline transmitters. Set the offline time
that activates the alarm.
22 (63)
EN - 5401comm