Adding Devices To Wireless Network - Produal Proxima WBU Commissioning And Maintenance Instructions

7. Press the Commission device button.
8. Press the Network installation button.
A random network key is generated. A new key can be generated by pressing the Generate a new
ID button.
9. Press the Next button.
10. Set the device name for the base unit.
The device name is also used for the network name.
Note: Don't use any special characters (ä, ö, å, :, [, etc.) in the device name.
11. Press the Next button.
12. Set the transmitter naming pattern.
Use ### to insert transmitter ID to the pattern.
13. Press the Next button.
14. Review the network configuration and press the INITIALIZE NETWORK button.
15. Select the method to continue.
• Press OK button to return to main view.
• Press Add transmitters to project button to add wireless transmitters to network.
Important: Configure all needed transmitter settings before connecting to the wireless
network.
The base unit deactivates the Bluetooth communication and moves to MIRA communication mode.
The wireless network is now visible in the Wireless installation projects view.

5.1.1 Adding devices to wireless network

Important: Configure all needed transmitter settings before connecting to the wireless
network.
1. Connect the supply voltage to the transmitter.
2. Start Produal MyTool
3. Press the Wireless installation projects.
The list of open wireless projects opens.
Produal Oy | Keltakalliontie 18, FI 48770 Kotka, Finland | tel. +358 10 219 9100 | fax. +358 5 230 9210 | info@produal.com
Published: 18.07.2019
®
.
Information is subject to change without prior notice.
47 (63)
EN - 5401comm