Cables; Technical Specifications; Rc3000-Sub-10Fxs/10Fxo; Appearance And Functions - Raisecom RC3000E Product Description

Raisecom
RC3000E (P100R001) Product Description
DIP bit
SW1-2
SW1-3
SW1-4
Before delivery, all bits of SW1 are ON.

4.4.7 Cables

DB9F

4.4.8 Technical specifications

Dimensions: 155 mm (Width) × 100.5 mm (Depth) × 25 mm (Height)

4.5 RC3000-SUB-10FXS/10FXO

4.5.1 Appearance and functions

Status
OFF Balanced match
ON Unbalanced
match
OFF Balanced match
Unbalanced
ON
match
OFF Balanced match
Unbalanced
ON
match
OFF Balanced match
Interface
When the interface impedance is 120 Ω, use the CBL-E1-DB9M/2RJ45-
2.5m cable to connect the RC3000E to the RJ45 head.
When the interface impedance is 75 Ω, use the CBL-E1-DB9M/4BNCF-
2.5m cable to connect the RC3000E to the BNC female interface.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Function
The No.1 way E1 works in balanced mode and is
matched with the impedance at the RX side.
The No.2 way E1 works in unbalanced mode and
is matched with the impedance at the RX side
The No.2 way E1 works in balanced mode and is
matched with the impedance at the RX side
The No.1 way E1 works in unbalanced mode and
the TX side is grounded.
The No.1 way E1 works in balanced mode.
The No.2 way E1 works in unbalanced mode and
the TX side is grounded.
The No.2 way E1 works in balanced mode.
Panel
Description
Cable
4 Cards
25