Leds; Technical Specifications; Application; Table 4-3 Leds On The Rc3000E-Sub-10Fxs/10Fxo - Raisecom RC3000E Product Description

Raisecom
RC3000E (P100R001) Product Description
In actual application, you can define that voice signal A is connected to the Tip line
while voice signal B is connected to the Ring line

4.5.4 LEDs

Table 4-3 lists the LEDs on the RC3000E-SUB-10FXS/10FXO.

Table 4-3 LEDs on the RC3000E-SUB-10FXS/10FXO

1
2

4.5.5 Technical specifications

Dimensions: 70 mm (Width) × 167.5 mm (Depth) × 20 mm (Height)
Maximum power consumption:




4.5.6 Application

The RC3000E-SUB-10FXS/10FXO of B.10 or later (with the PCB version of B.3 or later)
supports high-impedance recording, with the networking and function shown in Figure 4-2.



No. Description
FXS
FXO
RC3000-SUB-10FXS: < 10 W
RC3000-SUB-10FXO < 2.5 W
RC3000-SUB-10FXO-R < 2.5 W
The FXO-R interface on the RC3000E-SUB-10FXO is connected to the telephone line
of the recorded telephone in physically parallel mode. It extracts voice services when the
recorded telephone is being answered.
Timeslots of the FXO-R interface on the RC3000E-SUB-10FXO are cross-connected to
those of the FXS interface on the RC3000E-SUB-10FXS. The FXO-R interface extracts
voice services of the recorded telephone when the FXS interface is connected to the
recorded telephone or the monitor telephone.
The Recorder records voice or rings according to the ring current sent by the FXS
module. It starts recording as long as Telephone B receives or originates a call and has
established a conversation (when to record depends on configurations of the Recorder).
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Status
 Green: the card works in FXS mode.
Green  Off: the card works in FXO or FXO-R mode or
fails.
 Green: the card works in FXO or FXO-R mode.
Green
 Off: the card works in FXS mode or fails.
Description
4 Cards
27