Features; Naming Conventions - Raisecom RC3000E Product Description

Raisecom
RC3000E (P100R001) Product Description
organs, finance organizations, electric power entities, railway departments, and army, and
general user multi-service access for enterprises, districts and communities, office buildings,
etc.
The RC3000E can be centralized managed by Raisecom NView NNM platform, which
facilitates management and configurations of the local and remote ends. Thus, you can
effectively and quickly manage and maintain the RC3000E.

1.2 Features

The RC3000E provides the following features:











1.3 Naming conventions

Name: RC3000E
Model: RC3000E-XX
XX refers to the power type of the product.





Support dual power and five power modes: single Alternating Current (AC), single
Direct Current (DC), dual AC, dual DC, and hybrid AC/DC.
Provide 1 uplink card slot, 3 user card slots, and multiple kinds of uplink cards and user
cards.
Support full cross connection of 512× 512 64k timeslots carrying signaling.
Support 1+1 protection on the E1 interface.
The E1 transmitting clock supports master clock mode and E1 recovery clock mode.
Support E1 loopback detection.
Support built-in BERT. You can configure 8 way of E1 independently and can only
enable 1 way of E1.
Support SA data transparent transmission. You can choose SA4 channel, SA5 channel, or
independent timeslot as the E1 NMS channel.
Support the SNMP interface, Console Command Line Interface (CLI), and device
updating online.
Support the alarm output and 2 on/off values. You can configure it through the software.
RC3000E-AC/D: dual AC power
RC3000E-DC/D: dual DC power
RC3000E-AC/S: single AC power
RC3000E-DC/S: single DC power
RC3000E-AC_DC: hybrid AC/DC power
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
1 Overview
2