Verathon GlideScope Core Operation & Maintenance Manual page 32

ADMINISTRATIVE SETTINGS TAB
Use the Administrative Settings tab to modify the Note Fields, Device Name, and Security Code
as well as access Usage Statistics for the monitor and Power Cycle Times for the monitor and any currently
attached scopes.
1. To access the Administrative Settings tab, from the Home screen, tap the Main Menu
then tap the Settings
2. Tap the Administrative Settings tab. The Administrative Settings appear.
10:55 AM
2017-06-05
Feature
Settings
Regional Regional
USB
Settings Settings
Administrative
Settings
Table 7. Administrative Settings
SETTING
Usage Statistics
Device Name
Security Code
Note Fields
System Version
Reset Settings
* If the security code has been forgotten, please contact Verathon Customer Care to request a security code reset USB flash drive. For
contact information, visit
26
0900‑5017 REV‑02
button.
CITY HOSPITAL
Usage Statistics Device Name
Power Cycle Count
Washington Surgery Ctr #4
283 cycles
Logged Time
30 hours, 53 min
A
Cycle Count
Security Code
50 cycles
Logged Time
****
1 hour, 32 min
Enables security code protection
Cycle Count
of settings and media gallery.
41 cycles
B
Cycle Count Note Fields
25 cycles
Enables the presence of additional fields,
such as name and ID, within the note editor.
Logged Time
53 min
Patient Info
Cycle Count
1 cycle
Clinician Info
Displays information such as the logged time and power cycle counts.
Sets a device name that is shown in the status bar at the top of the display and
in video and snapshot time‑stamps when the Timestamps setting is on. For more
information on Timestamps, see
Sets a security code that when set, is required to access the Settings Menu and
*
Gallery.
Enables the presence of additional fields within the note editor, such as
Clinician Information and Patient Information.
Displays software versions for various system resources.
Restores all settings back to factory defaults.
verathon.com/global‑support
95 min
System Version
1.0.0 Software
1.4.0 Kernel
1.1.0 Avi Lib
1.4.0 Log Lib
1.2.0 UBoot
10.4.0 Qt Application
1.4.0 Wizard Application
1.4.0 Video Application
Busycat
1.4.0
1.4.0 Watchdog
1.3.11 Filesystem
1.2.0 Upgrade Manager
10.0.0 PIC
1.8.0 Hardware
1.3.0 OV788
Reset Settings
Tap the button below to restore
settings to their factory defaults.
Reset
FUNCTION
Feature Settings Tab
settings,
*
button, and
on page 24.