Verathon GlideScope Core Operation & Maintenance Manual page 28

2. Set the date and date format, and then tap the check mark to continue.
3. Set the time, time zone, and the daylight saving preference, and then tap the check mark to continue.
4. If you would like to set a security code, enter the code, and then tap the check mark. Confirm the code by
re‑entering it, and then tap the check mark. If the code is confirmed, you will proceed to the next setting.
If you do not want a security code, tap the Security Code toggle to Off
mark to proceed to the next setting.
Note: When a security code is enabled, users will require it to access the Gallery and system settings.
Figure 8. Security code on
* If the security code has been forgotten, please contact Verathon Customer Care. For contact information, visit verathon.com/global‑support.
22
0900‑5017 REV‑02
Figure 9. Security code off
, and then tap the check
*