Mounting The Tt1 Tonearm On The Statement Turntable - Clearaudio Statement TT1 User Manual

Statement TT 1
User Manual

5. Mounting the TT1 tonearm on the Statement turntable

Place the tonearm chassis on top of the two mounting bases. Lift it carefully, making sure
that the sliding tonearm bridge is positioned to the rear of both sliding bases as shown in
picture 8. While holding it in place, insert the four hex socket headed bolts provided into the
threaded holes in the tonearm mounting bases and tighten them.
Please note: Always hold the tonearm in place while fixing the four bolts.
Picture 8: Placing the tonearm assembly in position
Picture 9: Tightening the tonearm mounting bolts
Page 9  clearaudio electronic GmbH 2015