Clearaudio Statement TT1 User Manual page 8

Statement TT 1
User Manual
Now place the tonearm mounting base installation gauge (see picture 5 No. 4) on top of the
two mounting bases (see picture 5 No. 3). Rotate the mounting bases until all four pins on
the bottom of the installation gauge fit into the threads machined into the mounting bases.
4
3 3
Picture 5: Placing the installation gauge
4
3
3
Picture 6: Placing the installation gauge
While holding the installation gauge in place tighten the two bolts with the hex key (allen
key) (page 4, package content 5) provided.
Attention: Any misalignment at this stage will lead to later problems in positioning the
TT1 tonearm.
Picture 7: Tightening the mounting bolts
Page 8  clearaudio electronic GmbH 2015