Clearaudio Statement TT1 User Manual page 13

Statement TT 1
User Manual
Picture 16: Cartridge pre-adjustments
Cartridge adjustment
The correct tangential adjustment is essential. To ensure the correct adjustment, use the
cartridge alignment gauge, which must first be placed on the spindle.
The diamond tip of the cartridge must be always aligned in the black line of the gauge.
This fine adjustment can be realised by moving the armwand back or forwards.
Simply lock or unlock the screw on the bottom of the carriage.
Picture 17: Cartridge adjustment
Re-adjust the tracking force and set the cartridge Azimuth so that it is in a vertical position
when viewed from the front. Make a final check of all the parameters – tonearm level,
armwand level, cartridge alignment and tracking force.
Place a record onto the turntable platter and make the final fine adjustments.
Attention: Before first use or after a long period of storage, please move the cueing lift up
and down approximately 4-5 times so that the oil inside can flow allowing the cueing lift to
operate smoothly.
Page 13  clearaudio electronic GmbH 2015