Statement Tt1 Tonearm Mounting On Statement - Clearaudio Statement TT1 User Manual

Statement TT 1
User Manual

5. Statement TT1 tonearm mounting on Statement

Now you can place the tonearm chassis on top of the 2 cylinders. Take it carefully with one
hand at the top cover (tower bridge), so that the sliding bars are not moving. While holding
it in place, over the 4 machined threads, start inserting the provided (4) hex key screws and
tighten them.
Please note: Always hold the tonearm in place while fixing the 4 screws!
Picture 8: Placing the tonearm chassis on the top
Picture 9: Tighten the screw of the tonearm
Tighten the screws, one by one, gently but firm.
Page 9  clearaudio electronic GmbH 2013