Axis 2n SingleTalk User Manual page 65

Communicator for lifts
Hide thumbs Also See for 2n SingleTalk:
Table of Contents

Advertisement

Evaluation of Situations during Speakerphone Automatic
Dialing with Confirmation
Situation
Silence or busy tone
is heard upon seizure
Busy tone (after
dialing)
Talk or silence
Ringing tone
Continuous tone
(PBX)
DTMF char
or
DTMF char
DTMF sign
2N TELEKOMUNIKACE a.s., www.2n.cz
ST Activity
This has no influence on the operation; the
line status and only then evaluates the situation.
The
ST
hangs up in approximately 2 seconds and dials the following
number.
The
ST
waits for a defined timeout (logon time), then hangs up and dials
the following number.
The
ST
waits for a defined count of rings, then hangs up and dials the
following number.
The
ST
hangs up in approximately 2 seconds and dials the following
number.
The
ST
hangs up immediately and dials the following number.
The
ST
confirms receipt (2 beeps), mutes the message playback and the
call continues for the defined period of time (maximum call time).
ST sends identification but the connection is not confirmed. Used for
®
2N
LiftManager
applications.
These digits are interpreted as control characters.
ST
executes dialing with any
65/82

Advertisement

Table of Contents
loading

Table of Contents