Axis 2n SingleTalk User Manual page 19

four fan-shaped washers
four M4 nuts
CD with a full manual, Service Tools and 2N
This brief manual and a warranty certificate
ST Installation Conditions
ST is not designed for outdoor applications.
The product is connected to a telephone line where life-endangering voltage
may occur. Therefore, be sure to keep the safety precautions – refer to the
Electric Installation section.
It is forbidden to connect
The lift wall must be perfectly flat.
Tip
Use a portable telephone to check the telephone line function.
Do you know the telephone line number to be used? Check its
functionality.
For a PBX line connection, check other relevant conditions as included in
the Ways of ST Connection
Make sure that the lift panel has been prepared properly for ST
mounting.
Universal version
Check the lift panel for advance preparation for
Compact version
It is advisable to mount
outside (from the lift shaft).
2N TELEKOMUNIKACE a.s., www.2n.cz
®
ST parallel to another terminal on a line.
section.
ST where the lift cabin wall is also accessible from the
LiftManager
ST mounting.
19/82