Setting the units of measurement
This function allows changing the units of
measurement of the displayed values.
To manually set the units of measurement, you must
enter the SETTING MENU.
Select "UNT" option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
When entering this function, use buttons (1) and (2)
to select the parameter for which you want to set a
new unit of measurement or to restore the default
settings:
-
SPEED;
-
temperature (TEMP.);
-
fuel consumption (CONS.).
Besides the settings that can be modified, it is
possible to select the "DEFAULT" box to restore the
default units of measurement.
126
Note
The "UNT:DF" indication is only active if no unit
of measurement has been modified and therefore,
the instrument panel uses the units of measurement
set by default.
To exit the menu and go back to previous page, select
"EXIT" and press button (4).