ZyXEL Communications EX5501-B0 User Manual page 225

Figure 140 Security > Parental Control > Add/Edit PCP > Add New Service
The following table describes the fields in this screen.
Table 89 Security > Parental Control > Add/Edit PCP > Add New Service
LABEL DESCRIPTION
Add New Select the name of the service from the drop-down list. Otherwise, select User Define and specify
Service the name, protocol, and port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP & UDP.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Cancel Click Cancel to exit this screen without saving any changes.
OK Click OK to save your changes.
Add Site/URL Keyword
Click Add in the Site/URL Keyword section of the Edit/Add new PCP screen to open the following screen.
Note: Do not include "HTTP" or "HTTPS" in the keyword. HTTPS connections cannot be blocked
by Parental Control.
Figure 141 Security > Parental Control > Add/Edit PCP > Add Keyword
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
Chapter 19 Parental Control
225