E-Mail Notification Edit - ZyXEL Communications EX5501-B0 User Manual

Table 135 Maintenance > E-mail Notification (continued)
LABEL
E-mail Address
Remove

36.2.1 E-mail Notification Edit

Click the Add button in the E-mail Notification screen. Use this screen to configure the required
information for sending e-mail via a mail server.
Figure 186 E-mail Notification > Add
The following table describes the labels in this screen.
Table 136 E-mail Notification > Add
LABEL
Mail Server
Address
Port
Authentication
User name
Authentication
Password
Account e-mail
Address
Connection
Security
Chapter 36 E-mail Notification
DESCRIPTION
This field displays the e-mail address that you want to be in the from/sender line of the e-mail
that the Zyxel Device sends.
Click this to delete the entry.
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail address specified in the
Account e-mail Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Enter the same port number here as is on the mail server for mail traffic.
Enter the user name (up to 32 characters). This is usually the user name of a mail account you
specified in the Account e-mail Address field.
Enter the password associated with the user name above.
Enter the e-mail address that you want to be in the from/sender line of the e-mail notification
that the Zyxel Device sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated by
the mail server as well.
Select SSL to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want
encrypted communications between the mail server and the Zyxel Device.
Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
302