ZyXEL Communications EX5501-B0 User Manual page 305

Figure 187 Maintenance > Log Setting
The following table describes the fields in this screen.
Table 137 Maintenance > Log Setting
LABEL DESCRIPTION
Syslog Setting
Syslog Logging The Zyxel Device sends a log to an external syslog server. Click this switch to enable or disable to
enable syslog logging. When the switch goes to the right
Otherwise, it is not.
Mode Select the syslog destination from the drop-down list box.
If you select Remote, the log(s) will be sent to a remote syslog server. If you select Local File, the
log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog server and
save it in a local file, select Local File and Remote.
Syslog Server Enter the server name or IP address of the syslog server that will log the selected categories of
logs.
UDP Port Enter the port number used by the syslog server.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
Chapter 37 Log Setting
305
, the function is enabled.