Remote Switch Upgrade Configuration Example - H3C S3600 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510
Table 4-7 Display the operating status of the device management
Display the APP to be
adopted at next startup
Display the module type
and operating status of
each board
Display CPU usage of a
switch
Display
status of the fan
Display memory usage of
a switch
Display
status of the power supply
Display system diagnostic
information
system
information to a file with
the extension .diag into
the Flash memory
Display
debugging on a specified
switch or all switches in
the fabric
Display
debugging on all switches
in the fabric by modules

4.4 Remote Switch Upgrade Configuration Example

I. Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server
to the Flash memory of the switch. Update the switch software by using the device
management commands through CLI.
The switch acts as the FTP client, and the remote PC serves as both the configuration
PC and the FTP server.
Perform the following configuration on the FTP server.
Configure an FTP user, whose name is switch and password is hello. Authorize
the user with the read-write right on the directory switch on the PC.
Operation
display
unit-id ]
display device [ manuinfo
[ unit unit-id ] | unit unit-id ]
display cpu [ unit unit-id ]
the operating display
[ fan-id ] ]
display memory [ unit unit-id ]
the operating display power [ unit unit-id
[ power-id ] ]
or save
diagnostic
display
diagnostic-information
enabled display debugging { fabric |
unit
interface-type interface-number
| module-name ]
enabled
display
by-module
Command
boot-loader [
fan [ unit unit-id
unit-id } [ interface
debugging fabric
4-4
Chapter 4 Device Management
Description
unit
You can execute
the display
command in any
view.