H3C S3600 Series Operation Manual page 414

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
7.2 Common PIM Configuration
You can configure the PIM feature of the switch in interface view. The configuration
includes:
Table 7-1 Configuration tasks
Enable
(PIM-SM) on the interface
Configure the interval of
sending Hello packets
Configure PIM neighbors
Clear the related PIM
entries
7.2.1 Enabling PIM-DM (PIM-SM) on the Interface
Table 7-2 Enable PIM-DM (PIM-SM) on the interface
Enter system view
Enable
routing protocol
Enter
view
Enable PIM-DM/PIM-SM
on the current interface
7.2.2 Configuring the Interval of Sending Hello Packets
PIM-DM must be enabled on each interface. After the configuration, PIM-DM sends
PIM Hello packets periodically and processes protocol packets that PIM neighbors
send.
Operation
PIM-DM
Required
Optional
Optional
Optional
Operation
system-view
the multicast multicast
routing-enable
VLAN interface interface Vlan-interface
interface-number
pim dm / pim sm
Description
Section 7.2.1
(PIM-SM) on the Interface"
Section 7.2.2
Interval of Sending Hello
Section 7.2.3
Neighbors"
Section 7.2.4 "Clearing the Related
PIM Entries"
Command
7-10
Chapter 7 PIM Configuration
Related section
"Enabling PIM-DM
"Configuring the
"Configuring PIM
Description
—
Required
—
Optional
Configure the
protocol type on
interface
PIM
the