H3C S3600 Series Operation Manual page 868

Hide thumbs Also See for S3600 Series:

Table of Contents

Operation Manual – FTP and TFTP

H3C S3600 Series Ethernet Switches-Release 1510

This example uses the command line window tool provided by Windows. When you log

into the FTP server through another FTP client, refer to the corresponding instructions

for operation description.

If available space on the Flash memory of the switch is not enough to hold the file to

be uploaded, you need to delete files from the Flash memory to make room for the

H3C series switch is not shipped with FTP client applications. You need to purchase

and install it by yourself.

After uploading the application, you can update the application on the switch.

# Use the boot boot-loader command to specify the uploaded file (switch.bin) to be

the startup file used when the switch starts the next time, and restart the switch. Thus

the switch application is upgraded.

<H3C> boot boot-loader switch.bin

<H3C> reboot

For information about the boot boot-loader command and how to specify the startup

file for a switch, refer to the "System Maintenance and Debugging" module of this

1.1.4 FTP Configuration: A Switch Operating as an FTP Client

I. Basic configurations on an FTP client

The function for a switch to operate as an FTP client is implemented by an application

module built in the switch. Thus a switch can operate as an FTP client without any

configuration. You can perform FTP-related operations (such as creating/removing a

directory) by executing FTP client commands on a switch operating as an FTP client

connecting with the remote FTP server. Table 1-7 lists the operations that can be

performed on an FTP client.

Chapter 1 FTP and TFTP Configuration