Resetting The Heater - Aurora Archer IS1200 Installation & Operating Instructions Manual

RESETTING THE HEATER

If for any reason the Heater needs to be reset. Open the front panel from the
Heater to access the control compartment. If an error is present requiring that
the Heater be reset. The code for the error will be displayed on the display
panel along with the reset notification
Refer to page 40 for a list of error codes and how to resolve each.
Note: If the circulating air blower is running, allow it to complete its cycle
and shut down automatically before resetting the Heater. This will ensure the
fire place cools down.
To reset the Heater, repeatedly press "Mode Select" button on display panel
until the fireplace display turns off.
Once the display had turned off. Reset the mode to the desired form of
operation. If problems persist or resetting does not work. Contact a qualified
service technician.
49