Aurora Archer IS1200 Installation & Operating Instructions Manual page 46

Sleep Mode
**Menu Navigation
By pressing key O (Fig. 4), its possible to move sequentially to the accessory functions "sleep" and
"program", in this order; with a further pressure of key O (Fig. 4) the display operation comes back to the
active operational mode.
If no key is pressed within 7 seconds from the menu's navigations activation, the display comes back to
the active operational mode.
Sleep functions
"Sleep function" can be set by accessing the related menu (see par. Menu Navigation). The activation of
sleep function is postponed from the activation of a fixed time, settable (increase/decrease) at 15 minute
interval. The remaining time to sleep activation substitutes the current time indication on the display.
After the deactivation of sleep menu (7 seconds without any key pressure or further key O pressure) the
countdown to sleep activation appears on the display. As soon as sleep mode activation occurs, the
current time is again shown.
If during the sleep activation waiting interval a STANDBY activation is scheduled by CRONO program,
it is ignored and the operation proceeds until SLEEP intervention, while a manual STANDBY or shut
OFF disables the previous SLEEP command.
When SLEEP mode is active, the outline of SLEEP icon (Fig. 5) is shown.
Crono Program Function
"CRONO" mode program can be set directly by key O (Fig.4 ) - pressure if the burner is OFF, otherwise
accessing to MENU navigation (see par. MENU Navigation).
Once entered in program MENU navigation, the last set program is loaded, also OFF if the CRONO was
previously disabled.
When CRONO is on, the outline of CRONO icon is shown (Fig. 5) whilst the solid icon appears only
during settings.
Crono programs
There are 10 weekly programs, to disable CRONO operations select the "OFF" program.
Householder
Shift Worker
Shop
Shopkeeper
Shopkeeper
Workman
Workman
Workman
Workman
Weekend
REMOTE INSTRUCTIONS
45