Aurora Archer IS1200 Installation & Operating Instructions Manual page 44

REMOTE INSTRUCTIONS
INITIAL START UP. PRELIMINARY OPERATIONS
Insert the 3 AAA batteries in the black battery seat (Fig. 2 and Fig. 3)
CLOCK REGULATION
Quick Description: clock regulation is done by mean of keys and O (Fig. 4)
After first power on (batteries inserted)
As soon as the batteries are newly inserted the times digits blink.
The UP and DOWN keys (Fig. 4) increments (UP) and decrements (DOWN) the hour, minutes and
weeks day value, the keys O (Fig. 4) set the on going modifications value among hour, minutes, and
weeks day. After weeks day regulation, pushing O (Fig. 4) key sets automatically the operational
mode "OFF"
During Operation
During operation, press contemporarily for 3 seconds the pushbutton O and (Fig. 4), the written
"CLOCK" will appear. To change the clock settings, repeat the above described operations.
Switching ON-OFF
By pressing the pushbutton (Fig. 4) for at least 2 seconds, the fireplace and the handset are switched
ON-OFF. When the remote is switched OFF, the display shows the time, day, room
temperature and if enabled, "CRONO" symbol(Fig.5)
Automatic-Manual mode selection
With fireplace lit, by pressing key (Fig. 4) the operational mode is switched from manual to
automatic and vice versa. When switched from MAN to AUTO, the flame level is set on level 1.
When automatic mode is active, the display shows the SET temperature value and the "AUTO" icon.
When manual mode if active, the display (Fig. 5) shows the "MAN" icon, the flames icon and the
actual set flame level. If level 5 is currently active, the icon "MAX" below the flames icon appears.
43