Restore Factory Defaults - Pliant Crewcom CCU-22 Operating Manual

Restore Factory Defaults

Users can choose to restore factory defaults for the device or system. When restoring factory defaults, these settings
are reset to their original factory settings:
Note: Restoring CU factory defaults does not erase RP pairing information. Clearing an RP's memory
does erase RP pairing information. For information about clearing RP memory, see the RP Manual.
Control Unit Factory Settings
Control Unit Setting Control Unit Default
CU Name (Long) ESN#
CU Name (Short) ESN#
Contrast 3
Backlight Brightness High
Talk LED Brightness High
Sync Priority Master
Intercom Type OFF
Intercom Call OFF
Intercom Mic Kill OFF
Intercom Echo Can ON (2-Wire); OFF (4-Wire)
Intercom IN (2w/4w) 2W: −6
4W: 0
Intercom OUT (2w/4w) 2W: +4
4W: 0
Auxiliary IN 0
Auxiliary OUT 0
SA Relay Enable
SA Audio 0
Local Conference None
Local Mic Type Auto Detect
Local Mic Gain (Dynamic) 6 (+23 dB)
Local Mic Gain (Electret) 3 (−4 dB)
Local Sidetone Med (−12 dB)
TCP/IP Mode DHCP Client
Access Rights Admin
Reset by "Restore Defaults"
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Operation - 78