Table of Contents
Advertisement
TCP/IP Address
In DHCP mode: take note of the Control Unit's assigned IP address from this menu, and use it to connect to
CrewWare. In Manual mode, input your desired TCP/IP Address on this screen using the CU's navigation buttons.
Press the CU's enter button when done to save changes.
Figure 39 TCP/IP Address Input
Subnet Mask
Input the appropriate Subnet Mask address using the CU's navigation buttons.
Figure 40 Subnet Mask Input
Operation - 73
Advertisement
Table of Contents
Need help?
Do you have a question about the Crewcom CCU-22 and is the answer not in the manual?