Name A Device; Change Cu Name From The Cu; Change Device Names From Crewware - Pliant Crewcom CCU-22 Operating Manual

Name a Device

CrewCom devices can be given a 16-character long name and an 8-character short name for display in the various
CrewWare menus and diagrams. The default setting for CU Name is the device's electronic serial number.
Note: This is a different procedure than editing the RP Profile's name. (See the
and/or the "How to Edit a Profile" video

Change CU Name from the CU:

1. Scroll through the CU Settings options and select Control Unit Name to enter "edit" mode.
2. Use the CU's up/down navigation buttons to scroll to each desired letter. Then, use the right/left navigation
buttons to move to each letter of the name.
3. Press Enter to save your changes.

Change Device Names from CrewWare

Please refer to the CrewWare Manual
tutorial.)
Figure 19 Control Unit Name
for information about this process.
CrewWare Manual
Setup and Installation - 41