Device Information - ESP APWIFIDSBP2 Installation And Operating Instructions Manual

(Please follow the steps and recheck it in case the hub in the advanced setting is
delected accidentally)
1. Press and hold the pair button for 3 seconds. Wireless Hub will enter to pairing mode. You
will hear a voice prompt "Waiting for Device Pairing". The LED status light will quicky flash.
2. Press and hold the pair button for 3 seconds, The Video Door Phone will enter pairing mode
and the LED status indicator will quickly flash.
3. Once pairing complted, you will hear a voice prompt "Device Pairing Successful". The
wireless hub status indicator will turn to solid light.

(2-7) Device Information

This section shows the IP cameras FW Version, Total capacity and Available Capacity of
SD card.
2
2-7
34
1
3