Detailed Screen With Values; Schedule Screen: Example - Daikin Altherma 3 R F Installer's Reference Manual

8 | Configuration

8.3.6 Detailed screen with values

8.3.7 Schedule screen: Example

Installer reference guide
104
Item
Current temperature
Desired temperature
Submenu
a c b
a Settings
b Values
c Selected setting and value
Go through the list of settings.
Change the value.
Go to the next setting.
Confirm changes and proceed.
This example shows how to set a room temperature schedule in heating mode for
the main zone.
INFORMATION
The procedures to program other schedules are similar.
To program the schedule: overview
Example: You want to program the following schedule:
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Prerequisite: The room temperature schedule is only available if room thermostat
control is active. If leaving water temperature control is active, you can program
the main zone schedule instead.
1 Go to the schedule.
2 (optional) Clear the content of the whole week schedule or the content of a
selected day schedule.
3 Program the schedule for Monday.
4 Copy the schedule to the other weekdays.
c Measured by the unit
d Turn the right dial to increase/
decrease.
e Turn or press the left dial to go to
the submenu.
Example:
7.2.1
Hours
Minutes
a
Possible actions on this screen
Description
Time/date
11
30
c b
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03