Detailed Screen With Values; Preset Values And Schedules; Using Preset Values - Daikin EWYA004D2V3P Installer's Reference Manual

11 | Configuration

11.3.6 Detailed screen with values

11.4 Preset values and schedules

11.4.1 Using preset values

Installer reference guide
114
a c b
a Settings
b Values
c Selected setting and value
Go through the list of settings.
Change the value.
Go to the next setting.
Confirm changes and proceed.
About preset values
For some settings in the system, you can define preset values. You only need to set
these values one time, then reuse the values in other screens such as the
scheduling screen. If you later want to change the value, you only have to do it in
one place.
Possible preset values
You can set the following user-defined preset values:
Preset value
Electricity prices [7.5.1] High
under [7.5] User
[7.5.2] Medium
settings >
[7.5.3] Low
Electricity
price
Restriction: Only
applicable if
Bivalent is
enabled by the
installer.
Additional to the user-defined preset values, the system also contains some
system-defined preset values that you can use when programming schedules.
Example: In [7.4.2] User settings > Quiet > Schedule (weekly schedule for
when the unit has to use which quiet mode level), you can use the following
system-defined preset values: Quiet/More quiet/Most quiet.
Example:
7.2.1
Hours
Minutes
a
Possible actions on this screen
You can use these preset values in
[7.5.4] Schedule (weekly schedule
screen for the energy prices).
See "11.4.4 Setting the energy
prices" [
Time/date
11
30
c b
Where used
4
121].
EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688013-1B – 2022.09