Assembly - Safety - Landoll D5P Series Operator's Manual

ASSEMBLY INSTRUCTIONS

3-1 ASSEMBLY - SAFETY

CAUTION
1. THE PERSON OR PERSONS WHO
ASSEMBLE THIS MACHINE MUST
HAVE THE ABILITY TO READ, UNDER-
STAND AND FOLLOW THE STEP BY
STEP ASSEMBLY PROCEDURES AND
SAFETY INSTRUCTION OUTLINED
HEREIN.
2. ASSEMBLY AREA SHOULD BE
LEVEL, CLEAN AND FREE OF DEBRIS
TO PREVENT ASSEMBLY PERSON-
NEL FROM TRIPPING OR FALLING.
3. INSPECT ALL PARTS FOR SHARP
EDGES, GREASE, OIL OR DIRT WHICH
MIGHT CAUSE INJURY DURING AS-
SEMBLY.
WARNING
1. WEAR PERSONAL PROTECTIVE
EQUIPMENT (PPE) SUCH AS, BUT NOT
LIMITED TO, PROTECTION FOR EYES,
LUNGS, EARS, HEAD, HANDS AND
FEET WHEN OPERATING, SERVICING
OR REPAIRING EQUIPMENT.
2. USE LIFT CRANE, JACK, TACKLE
OR FORK LIFT TRUCK TO LIFT HEAVY
PARTS AND ASSEMBLIES.
3. KEEP CLEAR OF PARTS WHICH
MAY MOVE OR DROP WHEN REMOV-
ING SHIPPING STRAPS OR BRACK-
ETS.
4. IF MACHINE REQUIRES BLOCKING
UP, USE BLOCKING MATERIAL OF
ADEQUATE STRENGTH AND IN GOOD
CONDITION. BLOCKS MUST BE ON A
SMOOTH DRY SURFACE.
5. NEVER PLACE ANY PART OF YOUR
BODY UNDER BLOCKED-UP ASSEM-
BLIES.
6. IF WELDING OR FLAME-CUTTING IS
REQUIRED, BE SURE NO FLAMMABLE
MATERIALS ARE IN THE AREA. ALSO,
CLEAR BYSTANDERS FROM AREA.
3
3-1