Message Transmission Client Request; Command/Transmission Data ････････････････････34 - Toshiba V Series Operation Manual

Chapter 9 Message Transmission

9.3 Message Transmission Client Request

Command/Transmission Data
(1)
Note1: The completion status information when executing this request is stored in the
Note2: When an error response (M_RLT=1) comes from a server side node, "-5106
(2)
9
Note1: The completion status information when executing this request is stored in the
Note2: When an error response (M_RLT=1) comes from a server side node, "-5106
34
Byte block read
CMD
F
+0 65003
+1 Virtual address (L)
+2 Virtual address (H)
+3 Read byte size
STATUS area of the XMIT_T function block. See "Appendix Completion Status"
for the details of the completion status information.
(M_RLT= abnormal receive)" is stored in the STATUS area of a XMIT_T function
block. The error code of a server side node is not stored in that area.
Figure 9-2 Byte block read request
Byte block write
CMD
F
+0 65004
+1 Virtual address (L)
+2 Virtual address (H)
+3 Write byte size
STATUS area of the XMIT_T function block. See "Appendix Completion Status"
for the details of the completion status information.
(M_RLT= abnormal receive)" is stored in the STATUS area of a XMIT_T function
block. The error code of a server side node is not stored in that area.
Figure 9-3 Byte block write request
model 3000 FA Control Network [FL-net(OPCN-2)] FL311/FL312 Module Operation Manual
0 F
+0 Data read from specified
virtual address
0 F
+0 Data written to specified virtual
address
DATA
0
DATA
0