Westerm D20K: Jumpers - GE D20 Installation And Operation Manual

GE Energy
Connections and Configuration
WESTERM Jumper locations on the WESTERM D20K:
D20K: Jumpers
Z1
Z2 & Z3
To set Module address jumpering on Z1, see "WESTERM Addressing", page 65.
Use jumpers:
•
Z2 and Z3 for supply voltage setting
•
Z4 to Z39 to set Trip/Close, Raise/Lower and Control Outputs
See table below, next page.
General
Full
, continued
Z4 to Z39
994-0078-2.00-7
D20/D200
Installation and Operations Guide
69