Ethernet Capability; Media Interface Cards; Interconnect Cable - GE D20 Installation And Operation Manual

D20/D200
Installation and Operations Guide
Familiarization
, continued
Ethernet The Ethernet and global memory options that are available depend on the D20/D200
Capability base software, as shown in the following table.
Base Software
D20 with D20 Base
D20 with CCU Base
D200 with CCU Base
Media Interface If your D20/D200 system is enabled for Ethernet using the D20EME board, then you
Cards need a Media Interface Card (MIC). There are three types of media interface cards,
all of which are two-channel modules. For Jumper Settings on the various cards, see
"MIC Jumper Options", page
For LED operational indicators, see "Media Interface Cards LED Indicators", page
117.
Interconnect The interconnect cable links an "Ethernet" D20EME main card to a MIC card. The
Cable cable carries two channels of Ethernet traffic and power for the MIC card.
38

Ethernet Capability

Only
No
Yes, with VME Backplane
Yes, with VME Backplane
994-0078-2.00-7
Global Memory
Expansion Only
Yes
Yes, with VME Backplane
Yes, with VME Backplane
81.
GE Energy
Ethernet Capability AND
Global Memory Expansion
No
Yes, with VME Backplane
Yes, with VME Backplane
General
Full