Procedure: D20Me Ii - Ccu - GE D20 Installation And Operation Manual

D20/D200
Installation and Operations Guide
D20/D200 Software Configuration
Software Configuration – D20ME II, continued
Procedure: The following steps demonstrate the serial download of a Flash code file to a CCU
D20ME II - type of D20ME II module using the 68K Monitor.
CCU
Step
D20ME II - CCU Code Download
1
2
3
4
5
6
Optional Step 1: To speed-up communication to shorten download time
7
112
, continued
Restart the D20ME II, again.
As soon as messages display on the monitor, press the
within 5 seconds.
Result: A message displays, asking if you wish to abort the Flash
boot.
Type y.
Press . In the login dialog, type westronic and press
ENTER
type rd and press .
ENTER
Result: After a Welcome message, the D20MES> prompt displays.
Type sp to suspend all processes running on the D20ME II.
Type erase to clear the Flash. This will take several seconds.
Result: The monitor displays the messages below and then returns the
D20MES> prompt:
Erasing FLASH memory <
\ Checking FLASH contents... \
Type Baud 38400 and press
speeds may be chosen based on ambient EMI, cable length, PC limits
etc.)
Result: The communication speed of the 68K Monitor is set to 38.4
Kbps.
994-0078-2.00-7
Action
(speeds up to 230.4 Kbps, or lower
ENTER
GE Energy
key
SPACEBAR
, then
ENTER
General
Full