D20/D200
Installation and Operations Guide
Familiarization
, continued
WESTERM
The D200 uses the WESTERM D20M++ Termination Panel. Up to four
D20M++
D20ME/ME II boards can be connected to each Termination Panel.
Termination
Panel
D.20 Link Ports
Grounding Block
Power
Termination Block
Note
There are cases when you will need a second termination panel:
•
If you have more than four main boards and you want to utilize at least one serial
communication port for each board
•
If more than 28 serial ports are required
Contact GE Energy for further information.
22
Ribbon cable connections
Ribbon cable connectors
Ribbon cable connections
Ribbon cable connections
994-0078-2.00-7
GE Energy
Banks of RS-232 Serial
Communication Ports for
separate nodes
General
Full