Table of Contents
Advertisement
GE Energy
D20/D200 Software Configuration
Software Configuration – D20ME II, continued
Procedure: D20ME II - D20 Base (continued)
Step
Optional Step 2: To receive feedback during download
8
9
Download Code File
10
11
12
13
14
15
General
Full
, continued
Configure the HyperTerminal to communicate at the same speed, and
reconnect to the 68K Monitor.
If the communication software you are using does not have a "progress
indicator', you can enable echo to display the code file on the monitor as
it is transferred.
The echo option can be usually found in the Communication Settings or
Properties of the communication program.
Note:
Enabling echo may slow the transfer speed.
Type dl and press
ENTER
downloadable code file.
Click Transfer | Send Text File from menu bar.
Result:
A dialog box opens, prompting you to locate the Down.shx file
that you wish to download.
Select the correct file, and click Open to start the transfer.
Result:
The file transfer may take from less than 10 minutes to
over 30 minutes, depending on the communication speed
selected.
When complete, the D20M> prompt returns.
Type el /p to display the error log.
Result:
The D20M> prompt should return, indicating no errors found.
Errors? Record error(s), and re-try download.
If errors persist, contact GE for support.
Type el /r to clear the error log, even if there are no errors displayed in
the previous step.
Type Boot to restart device.
Result:
The D20ME II code download is complete.
994-0078-2.00-7
Installation and Operations Guide
Action
to ready the D20ME II to receive the
D20/D200
111
- Quick Links:
- Connections and Configuration
Hide quick links:
Advertisement
Table of Contents
