D20 Rear Panel: Non-Vme; D20 Rear Panel: Vme - GE D20 Installation And Operation Manual

GE Energy
Familiarization
, continued
D20 Rear
The Single Slot non-VME chassis has the WESTERM D20M+ SS Termination
Panel:
Panel attached directly to the chassis:
non-VME
Power Supply
Connector Block
WESTERM
D20M+ SS Panel
D20 Rear
The Termination panel for the VME version for the D20ME/ME II is the
Panel: VME
WESTERM D20M+. A D20M+ is required for each D20ME/ME II board.
Termination panels are mounted separately to the D20 chassis. The VME chassis kit
is supplied with a VME bus backplane, called the WESTERM D20VME.
The VME bus backplane connects to the Termination panels using ribbon cables:
•
Single D20ME/ME II to the D20M+ Termination panel with a ribbon cable from
Slot 1 on the bus backplane
•
Multiple D20ME/ME II boards to D20M+ Termination panels from multiple
slots on the bus backplane
The WESTERM D20VME bus backplane for single D20ME/ME II board:
Power Supply
Connector Block
Ribbon cable from slot 1 to
WESTERM D20M+
General
Full
Installation and Operations Guide
994-0078-2.00-7
D20/D200
17