Section 2 - Familiarization
2.4-5
Optional Equipment/Attachments
5
Test Work Light (If Equipped)
•
1. Select the on/off switch located on the
back of the light housing and switch it to
the on position.
Result: The light should turn on.
2. Turn the switch to the off position. Push
in platform "
3. Dismount the platform.
Ensure that you maintain three points
of contact to mount/dismount platform.
Test All Motion Alarm (If Equipped)
•
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Ensure path of intended motion is clear.
2. Activate any drive or lift functions.
Result: Alarm should sound.
SJ 63AJ
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
" emergency stop button.
WARNING
WARNING
December 2007
contained in this operating manual and on the aerial platform.
Work Light
3. Stop all platform motion.
Result: Alarm should stop.
NOTE
On aerial platform with certain options, a flashing
amber light will accompany this alarm.
Test Flashing Amber Light (If Equipped)
•
1. Ensure path of intended motion is clear.
2. Activate any drive or lift functions.
Result: Light should flash.
3. Stop all platform motion.
Result: Light should stop flashing.
Procedures
Page 39