Advertisement
Installation Instructions:
FIG 10
Open the door by lifting up on the latch
knob on the inside of the door. Gently
swing the door open and loop the door
check strap over the hook on the inside
of the door. Attach the other end of the
door check to the factory hook on the
inside of the vehicle.
Repeat all steps on all remaining doors,
front and/or rear.
See next page for Mirror Installation.
Enjoy the fun and freedom of your
Tube Doors! There's nothing quite like it!
The check the straps have multiple
positions to allow for adjustment.
Adjust the position of the straps so that
he door will not open too far and come
in contact with the body of the vehicle.
This could cause damage to the door of
the vehicle. (FIG10)
IF DOORS SWING OPEN TOO FAR YOU CAN DAMAGE THE BODY OF
THE VEHICLE. PLEASE USE CAUTION.
5
Advertisement
