Table of Contents
Advertisement
A
PPENDIX
An optional LCD/keypad is available for the Prototyping Board.
Appendix C describes the LCD/keypad and provides the soft-
ware function calls to make full use of the LCD/keypad.
C.1 Specifications
Two optional LCD/keypad modules—with or without a panel-mounted bezel—are available
for use with the Prototyping Board. They are shown in Figure C-1.
Only the version without the bezel can mount directly on the Prototyping Board; if you
have the version with a bezel, you will have to remove the bezel to be able to mount the
LCD/keypad module on the Prototyping Board. Either version of the LCD/keypad module
can be installed at a remote location up to 60 cm (24") away. Contact your Rabbit sales
representative or your authorized distributor for further assistance in purchasing an LCD/
keypad module.
User's Manual
C. LCD/K
Figure C-1. LCD/Keypad Modules Models
M
EYPAD
ODULE
79
Advertisement
Table of Contents
