Technical Data, Supply Unit Bg2 - Keba ServoOne CM-P BG1 Operation Manual

1
ID no.: 1400.201B.5-00
DAMAGE TO THE DEVICE DUE TO CONNECTION OF AN EXT.
CAUTION!
BRAKING RESISTOR!
x Carelessness may result in significant damage.
Please note that no additional external braking resistor is allowed to be connected to the device
model "with integrated braking resistor".
Date: 02/2020
Operation Manual Supply Unit SO CM-P BG1+2
A.2

Technical data, supply unit BG2

Device
Input, mains side
Mains voltage U ± 10 %, 3 times
N
Continuous current [A ], typical
AC eff
Peak current [A ], typical
AC
Continuous power, typical (depending on mains
impedance)
Rectifier power dissipation
Asymmetry of the mains voltage
Frequency
Max. cable cross-section of the terminals X12
DC link output
DC link voltage typical *
Continuous current
Peak current 2 x I for 1 s
N
mains choke not required
Continuous power P
N
Peak power 2 x P for 1 s
N
DC link capacitance only CM-P
Required total DC link capacitance for continuous
power
Permissible DC link capacitance SOCM + CM-P
Power dissipation P in the interior
rated
* Load-dependent
Table A.3 Technical data, ServoOne CM-P BG2
CAUTION! DAMAGE TO THE SUPPLY UNIT DUE TO OVERLOAD IN THE DC LINK!
x Carelessness may result in significant damage.
The maximum overall capacitance of the multi-axis system DC link must not exceed the value
stated.
46
Unit SOCM-P.0022 / SOCM-P.0122
V AC 230 400 480
A 46 46 38
A 92 92 76
kVA 18.5 32
W 110
±3 % max.
50-60 Hz ± 10%
1.5 ... 16 mm 2 (fine-stranded cable with/without
ferrules)
V DC 325 565 678
A DC 39 39 32
A DC 78 78 64
kW 12.5 22
kW 25 44
µF 840
µF 2200
µF 4000 (3160 + 840) max.
W 130